Handbuilt in Minnesota

HEDAero wheelssince 1984

Vanquish Pro carbon road wheels, Jet aero and disc wheels, Lancaster and Stillwater gravel wheels and the Ardennes all-road wheel, handbuilt in Minnesota. Shipped to the continental US.

Triathlete racing on a HED Jet disc rear wheel and HED front wheel

About HED

HED has built wheels in Minnesota since 1984, and the brand still carries the signature of its founder, Steve Hed. More than 35 years of aerodynamic work sit behind the current range, and every wheel is still laced and trued by hand in Roseville, Minnesota. HED aero discs and deep Jet wheels have been a familiar sight in triathlon and time trial racing for decades, and the S-bend aerobar extension started at HED.

The Vanquish Pro is the top of the line: a full carbon, disc brake wheel in 45, 62 and 84 mm depths, with every rim molded and finished by hand, paired with the Vanquish Pro aero disc for the rear. The Jet family takes a different route to speed, a carbon aero fairing over an alloy rim, offered as Jet RC Pro for disc brakes, Jet RC Black and Jet RC Performance for rim brakes, Jet Track for the velodrome and the 180 mm deep Jet 180 rear wheel. HED made wide rims its standard back in 2014, and the 21 mm internal Jet rim is shaped around modern race tires.

Off the pavement, the Lancaster G25, named for Lancaster County, Nebraska, home of Gravel Worlds, and the Stillwater G50, HED's deepest gravel wheel, are hooked carbon wheels with a 28.5 mm internal width for tires from 40 mm to 2.25 inches. The alloy Emporia GA is sized around the 40 to 45 mm tires seen most at gravel races, in 700c and 650b, and the Ardennes RA, which HED calls the original all-road wheel, has been one of its most popular wheels for more than 15 years. For snow and sand, the Big Deal fat bike wheels use HED's patented Inflatobam tubeless rim.

Dragonspine Cycling carries the HED range of wheels, rims and the parts that keep them running, from freehub bodies and thru axle kits to valve stems and replacement decals. Front wheels, rear wheels and complete wheelsets are listed separately, so a mixed-depth set is simple to put together. Orders ship across the continental US, and Dragonspine Cycling, 4357 N Milwaukee Ave, Chicago, is the place to talk through freehub standards, tire sizes and setup, or call +1 (872) 946-7006.

FAQ

What is the difference between HED Vanquish Pro and Jet wheels?
Vanquish Pro is full carbon and disc brake only, in 45, 62 and 84 mm depths. Jet wheels put a carbon aero fairing over an alloy rim, in 38, 60 and 90 mm depths, with versions for disc brakes, rim brakes and the track.
Can a HED front or rear wheel be ordered on its own?
Yes. Every HED wheel listing offers the front wheel, the rear wheel with a choice of freehub body, or the complete wheelset, so a mixed-depth set such as a 62 mm front with an 84 mm rear is simple to order.
Which freehub body is needed?
Shimano HG for Shimano 11 and 12-speed road and SRAM 11-speed cassettes, SRAM XDR for SRAM 12-speed road and gravel, Shimano Microspline for Shimano 12-speed mountain cassettes, Campagnolo N3W for Campagnolo 13-speed, and SRAM XD on the fat bike wheels. Call +1 (872) 946-7006 to confirm before ordering.
Where are HED wheels made?
HED wheels are handbuilt in Roseville, Minnesota. Vanquish Pro rims are molded and finished by hand there, and every wheel is laced and trued by hand.
Do HED wheels ship from Dragonspine Cycling?
Yes. HED wheels, rims and parts ship across the continental US, with free pick up at Dragonspine Cycling, 4357 N Milwaukee Ave, Chicago.